BJ-W5I16 16 Channels Wireless Hand-held Voting System with Interpretation
System Overview
General Description
◆Simultaneous interpretation, voting, interpretation&voting all-in-one, three working modes to meet various demands
Wireless Voting & Interpretation Terminal BJ-W5I 16
Technical Specifications
Modulation Mode | FS-FHSS technology |
Communication | 10mW wireless communication, |
Encryption | AES( depending on the region) |
Max system capacity | unlimited( interpretation mode) |
Interpretation channel | 12 |
Grouping | 255 groups |
Channel transponder | 24 selectable channels |
Registration | keypress/ insert card |
Sensitivity | -121dBm |
Frequency response | 60Hz~16KHz |
Headset jack | 3.5MM jack stereo |
LCD screen | 35*17.5MM |
Battery display | Real-time display, low-level alarm |
Battery specification | Lithium battery or three AAA batteries, |
Service time | ≥26 hours( lithium battery, different service |
Package | Aluminum carry case |
Dimensions | 150*63*22mm |
Net weight | 0.13Kg(excluding batteries) |
operating temperature | 0~45℃ |
Storage temperature | -20~50℃ |
Server GONSIN30000I
Features
♦ FS-FHSS(Frequency Selecting – Frequency Hopping Spread Spectrum)innovated by GONSIN, stable and reliable system performance
♦ High-efficient digital audio lossless compression technology
♦ Dynamic display of operational information of the server with OLED display panel
♦ Unified server shutdown function for headset receiver/conference terminal
♦ Compact 1U rack design, simple deployment
Basic functions
♦ FS-FHSS(Frequency Selection - Frequency Hopping Spread Spectrum)innovated by GONSIN, allows the server to auto-detect available 2.4GHz RF; when working with supporting software, the server adopts a reliable hopping mechanism to avoid co-channel interference.
♦ Set Host ID of the server by the LCD panel for receiver grouping management.
♦ Digital audio lossless compression technology improves wireless carrier utilization rate, and avoids interference if multiple systems are used within the same building.
♦ The system is compatible with the terminal of digital interpreter and simulative interpreter, can fit with the chosen interpreter terminal in accordance with need of the user.
♦ Unified server shutdown function for headset receiver/conference terminal .
With DCS-3021 wireless conference terminal, GONSIN30000I server can realize functions below
♦ Support 8×1 SD /8×8 HD automatic camera tracking by video switching matrix
♦ AUTO and FIFO microphone modes;
♦ Max four microphones can be activated at the same time (1 chairman terminal and 1/2/3 delegate terminals);
♦ Volume/tone adjustable;
♦ ID number writing available, to facilitate terminal management;
Technical Specifications
Max Capacity of System | Unlimited simultaneous interpreter receivers( within signal distance); Max number of conference terminals: 500 ( within signal distance) |
Frequency response | 30Hz~16KHz |
Signal to noise ratio | ≥95 dB (A-weighting) |
Distortion | ≤ 0.5% (total harmonic distortion: 50Hz~8KHz) |
Max. audio output | LINE OUT: +20dBu |
Interfaces | eight-pin socket x 1 (for connecting to WAP device) balanced audio output (XLR connector) x 1 non-balanced audio output (RCA connector) x 2 RJ-45 interface x 1 (for connecting to PC) RS-232 interface x 1(for controlling camera tracking video matrix) RS-485 bus interfaces x 1 group (for controlling cameras) |
Power supply | AC110/220V±10%, 50~60Hz |
Enclosure | 19-inch standard cabinet |
Dimensions | 1U (340mm×420mm×45mm) |
Weight | 4 kg |
Working temperature | 0~45°C |
Storage temperature | -20~50°C |
ZJ-W5 Wireless Base Station Unit
Wireless base station unit has A/B output channels. As one channel is out of the service, it can use the backup channel to ensure the conference is normal; it comes with the signal detection function, it can automatically scan the wireless environment of the conference scene and select the best communication without any interference, ensure the stable operation; Single standard equipped base station unit can support up to 200 wireless voting units. The maximum capacity of the system is up to 4096 units.
Features
Channel detection and channel selection, chose the not-interference channel to ensure stable communication
Double Units backup functions to ensure stable operation of the system
Different antennas for different distance
Single base station can control up to 200 wireless voting units
Flexible deployment in accordance to the conference environment
Fashion appearance design
Functions
A/B 485 interfaces for larger system
With up to 200 voting units, it can connect with the central controller to support 4000 voting units
With A/B 232 interface, it can be connected to PC
Antenna connectors for A/B channels to connect small size or medium size antenna
With 232 detection interface and detection antenna connector, detect the wireless signal on site.
A/B channel selection switch
ZJ-K1 Wireless Voting Central Controller
Wireless Voting Central Controller is the extended equipment when more than 200 voting units is used or when the connection distance between PC and the base station is more than 15 meters. It can support up to 4000 voting units.
Functions
4 RS-232 interfaces to connect to PC
4 RS-485 interfaces to connect to the base station and supply power;
Control up to 4 base station units
Technical Specification
Working voltage | Input AC 220V±10% 1A，output DC 12 V |
Weight | 2.0Kg |
Dimension( W×D×H) | 485mm×287mm×90mm |
Working temperature | 0～45℃ |
Storage temperature | -20～50℃ |
Interpreter Console TC-F06/F16
Features:
- Digitally-controlled workstation designed for 6-channel or 16-channel interpretation system.
- LCD screen to display the following information:
1) Channel selection and confirmation
2) Incoming/outgoing channel number
3) All the occupied channels
4) Channel number of this unit
5) Previous and present interpretation time
- Two types of microphone can be used
1) gooseneck microphone
2) headset boom microphone
- Built-in loudspeaker with volume level control. Loudspeaker is automatically switched off when the microphone is turned on.
- 3 pre-selected incoming channels for relay interpretation.
- Two outgoing channels can be used for normal interpretation and retour interpretation
- Automatic channel interlocking function prevents the interpreters from using the same outgoing channel.
- SLOW key to alert the current speaking delegate to speak slowly. When the key is pressed, the speaking delegate’s microphone red ring luminant will blink.
- MUTE key to enable a brief muting of the microphone for cough cut.
- Floor audio automatically switches to the outgoing channel when the microphone is turned off.
- Output volume level can be adjusted throught the L/M/H switch
- Multiple interpreter consoles can be interconnected in a daisy-chain
Technical Specifications:
- Frequency response: 50-18kHz
- Distortion at 1 kHz: < 0.1%
- Channel separation: > 85 dB
- Signal-to-noise ratio: > 90 dB
- Max. input power level: 7.5V
- Operating voltage: 24V
- Power consumption: 2.5W
- Standard microphone stem: 410 mm
- Built-in loudspeaker 8Ω/2W
- 128x64 backlit LCD screen
- 3.5mm jacks for MIC/REC/Headphone
- Dimensions: 247X145X
- Weight:
GX-60B Charging Case
Features
◆ Aluminum storage flight case for charging & storage
◆ Microprocessor-based smart charging circuit
◆ Accommodates up to 60 receivers
◆ Independent LED indicators for charging status
◆ Less than 2.5 hours are needed to fully charge 60 units
◆ Fully charged units can remain in the case
◆ 2 butterfly locks, wheels and 3 handles,easy to carry
Technical Specifications
Power input AC 100-240V, 50-60Hz, 220W
Power output 5V, 20A
Charging status indicator Charging(red light)
fully charged(green light)
Operating temperature 0-45℃
Storage temperature -20-50℃
Dimensions (W x D x H) 686×433×235mm
Net Weight 14.5 Kg
System Diagram
